arctixClimate Systems

Portable
Split AC

arctix Portable Split AC in white: indoor unit on castors and outdoor unit, connected by a flat white line
Top of the white indoor unit with control strip, air outlet and arctix logo

arctixarctix Portable Split AC · manufacturer model YFG-12H/FC6-W

Pre-order · from March 2027

Cool in summer. No remodelling.

In summer, your home heats up and barely cools down at night. This system cools the room you are using.

An ordinary portable air conditioner is a single box in the room. Here there are two parts: the indoor unit stands with you, the outdoor unit releases the heat outside. So the warm side stays outside.

Nothing is permanently installed. You set up the two units, connect them and take them with you when you move.

Pre-order · Available from March 2027

CHF 1’199incl. VAT · shipping CH/LI

Version

Shipping to Switzerland and Liechtenstein

Swiss customer support

Advice before you buy

What you
get out of it.

Up to 12,000 BTU

Cooling capacity for hot summer days.

Split architecture

Only the indoor unit is in the room. The heat goes outside.

Inverter technology

The output adjusts itself instead of constantly switching on and off.

WLAN

Operate the system from the sofa or while you’re out.

R32

R32 refrigerant, as specified by the manufacturer.

Heating

Depending on the version, the system doesn’t only cool, it heats too.

Want to know more? The frequently asked questions below address each point individually.

Is it right
for your room?

The system is intended for rooms where a permanently installed unit isn’t possible or isn’t wanted. How much cooling capacity a room needs depends on several things. On its size. On the windows and how long the sun shines in. On the floor. And on how you use the room.

An attic flat with south-facing windows behaves differently from a bedroom on the ground floor. That’s why we don’t give a rule of thumb here that then doesn’t hold for your case. Write us a few lines about your situation. We’ll tell you honestly whether it fits. These details help us:

Room

Bedroom, living room, office

Windows and sun

Size and orientation

Floor

Ground floor to attic flat

Use

At night, during the day or both

A few sentences are enough. If the system isn’t right for your room, we’ll tell you that too.

What arrives at your door.

Indoor unit

The part that stands in your room, with air ducting, control panel and controls.

Outdoor unit

Releases the heat outside so it doesn’t stay in the room.

Connection system

Connects the two units to each other.

Window feed-through

Accessory so the connection runs outside as cleanly as possible.

Documentation

Operating and safety instructions for the Swiss market.

We’ll confirm the final scope of delivery as soon as the system is available. If you’d like to know now whether a particular accessory is included: just ask us.

Two units. Discover how they work together.

Select a part to explore the system.

arctix Portable Split AC in white: indoor unit on castors and outdoor unit, connected by a flat white line

Indoor unit

The indoor unit distributes cooled air around the room. Control it using the Wi-Fi app, remote control or touch panel.

Outdoor unit

During cooling, the outdoor unit releases heat outside. It needs a suitable position with free air circulation.

Connection

A 2-metre line connects the units. Route the connection and position the units according to the manufacturer’s instructions.

A closer look at the details

Product visualisation. Not footage of the unit in operation.

Top of the white indoor unit with control strip, air outlet and arctix logo
Top of the white indoor unit with control strip, air outlet and arctix logo

Product visualisation. Not footage of the unit in operation.

Your room. The first step towards advice.

Three details help us discuss the setup with you.

Which room would you like to cool?
How much direct sunlight does the room get?
Is there a possible place for the outdoor unit?

What we will discuss with you

We will discuss room size, cooling requirements and a safe route for the connection.

An initial guide. We assess suitability and required capacity personally with you.

A good place. Outdoors too.

The indoor unit stays in the room. We help you plan a suitable position for the outdoor unit close to a window or door.

Visualisation: arctix outdoor unit on a paved terrace beside a slightly open sliding door

On the terrace

Close to the room entrance. Route the connection through a suitable opening without crushing it or making sharp bends.

Visualisation based on the manufacturer catalogue: white arctix outdoor unit on a bracket by an open window

By a window

An arrangement shown in the manufacturer’s catalogue. We help check whether your window, bracket and connection route are suitable.

Visualisation based on the manufacturer catalogue: white arctix outdoor unit outside a French balcony railing

On a railing

The catalogue shows a railing attachment on a French balcony. Both the railing and the appropriate bracket must be suitable.

Visualisation based on the manufacturer catalogue: white arctix outdoor unit in a cradle below a roof window

By a roof window

The catalogue also shows the outdoor unit below a roof window. The roof, mounting and access must be suitable for this setup.

AI-assisted product visualisations based on the product reference. Not installation instructions. Manufacturer connection length: 2 m. Check clearances, routing, mounting and weather protection in the manufacturer’s instructions. Window installations require a suitable bracket. The brackets shown are schematic and are not a confirmed part of the package.

Discuss my setup

Technical data

arctix Portable Split AC · manufacturer model YFG-12H/FC6-W

  • 12,000 BTU/hCooling capacity
  • 5.6SEER (cooling)
  • 39 dB(A)in sleep mode
  • R32Refrigerant

Performance and power

Cooling capacity
12,000 BTU/h (3,500 W)
Heating capacity1
12,000 BTU/h (3,500 W)
Power supply
230 V / 50 Hz
Rated input, cooling
1,200 W
Rated current, cooling
7.0 A
Rated input, heating1
1,100 W
Rated current, heating1
6.0 A
SEER2
5.6 (A+)
SCOP12
4.0 (A+)

Air and sound

Airflow per fan speed
450 / 420 / 370 / 320 / 245 m³/h
Indoor unit sound level per speed3
51 / 50 / 49 / 47 / 39 dB(A)
Sound level in sleep mode3
39 dB(A)
Outdoor unit sound pressure level3
57 dB(A)

Operating range

Outdoor temperature, cooling
0 to 45 °C
Outdoor temperature, heating1
−10 to 24 °C
Application volume4
105 m³ room volume

Dimensions and weight

Indoor unit (W × D × H)
430 × 320 × 730 mm
Outdoor unit (W × D × H)
492 × 263 × 460 mm
Packaging (W × D × H)
695 × 575 × 890 mm
Net weight, indoor unit
22.0 kg
Net weight, outdoor unit
10.0 kg
Total net weight per catalogue5
34.5 kg
Gross weight
43.0 kg

Features

Technology
Full DC inverter
Refrigerant
R32
Functions1
Cooling, heating, fan, dehumidifying
Connection line
2 m
Fan speeds
3 speeds, auto swing
Control
WLAN app, remote control, touch panel
Display and timer
LED display, 24-hour on/off timer
Housing
White, matt
Window brackets6
for common window types
  1. Heating data apply to the documented version with heating function (manufacturer model YFG-12H/FC6-W). For the “Cooling” version (cooling only) we do not have a separate manufacturer data sheet; we confirm its values on request.
  2. Efficiency figures according to the manufacturer’s catalogue. This is not an official energy label; we do not yet have a label for Switzerland.
  3. Manufacturer figures per fan speed, without stated measuring conditions. What you hear in the room depends on placement and surroundings.
  4. The manufacturer states cubic metres of room volume, not floor area. Whether the output is enough for your room depends on the heat load: windows, sun, floor, use. We are happy to advise you.
  5. The catalogue states 34.5 kg total net weight; the indoor and outdoor units add up to 32.0 kg. We are clarifying the difference with the manufacturer and show both values until then.
  6. According to the manufacturer, for normal windows, balconies, roof windows and French balconies. We confirm the Swiss scope of delivery and installation according to the manual before delivery.

Manufacturer and documents

The Portable Split AC is made by Foshan Nordica Electrical Appliances Co., Ltd. in Shunde, Foshan, Guangdong, China. Stucki Industries offers it under the product brand arctix in Switzerland and Liechtenstein and handles import, sales and support.

The manufacturer describes itself as specialised in portable air conditioners, portable split units and dehumidifiers, with a 60,000 m² manufacturing centre and a capacity of more than 1.5 million units per year. These are the manufacturer’s own statements.

Documents

Declaration of conformity, test reports, certificates
not yet available
Operating manual for Switzerland
follows with availability

Approval marks according to the manufacturer

We do not yet have a model-specific declaration of conformity, test reports or certificate files for the arctix version. We will publish them as soon as we have them. Ask us for the current status.

The manufacturer states these for large parts of its range and for the company. They do not refer explicitly to this model.

Conformity and directives

  • CE
  • EMC
  • LVD
  • ErP
  • RoHS
  • REACH

Test programmes and marks

  • CB
  • GS
  • ETL
  • TÜV SÜD

Marks for other markets

  • UKCA
  • CCC
  • KC
  • SAA

Company

  • ISO 9001
  • BSCI / amfori

The CE marking is the manufacturer’s declaration of compliance with EU rules, not a quality award.

In three steps
to a cool night.

1. Positioning

Set up

The indoor unit goes in the room, the outdoor unit outside, as described in the manual.

2. Setting up

Connect

Connect the two units to each other. The manual guides you through step by step.

3. Cooling

Switch on

Choose a temperature. The system does the rest.

For different rooms


Selected for
Swiss summers.

A unit you set up and take with you again goes wherever it’s too warm right now. For example here:

Bedroom

So the night stays restful, even when the day was hot.

Living room

For the evening, when the room has been heating up all day.

Home office

In the afternoon the sun sits in the window. The thinking is still up to you.

Office

A room where several people are sitting gets warm quickly.

Questions
that come up before you buy.

Here are the answers we can give with certainty today. Where something is still open, we say so.

What is a Portable Split AC?

A climate system in two parts. The indoor unit stands in the room and cools. The outdoor unit releases the heat outside. This separation is familiar from permanently installed split systems. Here it stays mobile: the units are set up and connected, not built in.

Do I have to drill or permanently mount anything?

No. The two units are set up and connected to each other. Permanent wall mounting isn’t intended.

How do the indoor and outdoor unit connect?

Through a 2-metre connection line between the indoor and outdoor unit. The manufacturer provides window brackets for common window types; we will confirm the scope of delivery for Switzerland and installation according to the manual as soon as the system is available. Want to know beforehand whether that works at your window? Write to us.

Can the system heat as well?

Depending on the version. There’s a version that only cools and one that also heats. You can see which versions can be ordered in the configurator above.

How do I control the system?

According to the manufacturer via WLAN app, with the remote control or on the touch panel of the indoor unit. Which app it is exactly, we’ll announce as soon as it’s settled.

Which refrigerant is used?

The manufacturer specifies R32 for model YFG-12H/FC6-W. R32 is a fluorinated refrigerant of the kind used in many air conditioners and heat pumps today.

How big can my room be?

The manufacturer states an application volume of 105 m³: cubic metres of room volume, not floor area. Whether that’s enough for your room depends on the heat load: windows, sun, floor, use. How we work it out for your room is described above under Is it right for your room?

When will the system be available?

Available from March 2027. You can place a binding pre-order now with payment in advance. We deliver to Switzerland and Liechtenstein.

How can I pay and where do you deliver?

We deliver throughout Switzerland and to Liechtenstein. Payment is made in advance by bank transfer; you receive our bank details by email after ordering. You’ll see everything else during the order process.

Who do I turn to if something doesn’t work?

To us. Customer support is based in Switzerland. Write to support@stuckiindustries.com or call: +41 78 668 99 01. Tell us briefly what happened. Then we’ll take care of it.

Who is behind the product?

Stucki Industries KLG in Birchwil, Nürensdorf ZH. We search worldwide for good products from international manufacturers, examine them carefully and bring selected ones to Switzerland. Import, distribution and support we handle ourselves. The unit is made by Foshan Nordica Electrical Appliances in Guangdong, China; we offer it under the product brand arctix.

Your question wasn’t there? Write to info@stuckiindustries.com or use the contact form. We answer you personally, even when the answer is no.

How you get
your system.

We deliver throughout Switzerland and to Liechtenstein, to private customers and to businesses. Pre-order here with payment in advance. Delivery starts in March 2027.

For your home

Once the system is available, you order directly in our Swiss shop. Not sure which version suits you? Ask us first. It costs nothing.

Ask a question before buying

For your business

You need several units? Write to us about what you have in mind and for which rooms. We’ll make you an offer that fits. For example for:

Property managers

Companies and offices

Hotels and restaurants

Holiday rental providers

Retail and distribution